Due to differences in stone types, their hardness varies, leading to the use of distinct crushing and sand-making equipment. Below is an overview of several commonly employed crushing machinery and sand-making equipment.
It's better to prepare a sieve for standby in case the sieve of vibrating screen is damaged to affect the normal operation. Of course, we should use it carefully, avoid overload work so as to prolong its service life.
The main parameters of hammer crusher include linear velocity, production capacity and motor power.
Jaw crusher is the first choice of primary crushing device. In daily operations process it was inevitably wear and tear, which requires us to pay more attention in the course of normal maintenance and repairs in order to reduce unnecessary losses.
One common issue is the fracture of the main shaft of cone crusher, which can significantly impact the normal functioning of the crusher. In the following section, we will explain some potential causes of main shaft fractures.
Jaw crusher is one of the indispensable machines for primary crushing in mining crushing production line, normally it is used in the first crushing process. As a result, the components are always in worse abrasion, especially the jaw plate.
The small grain materials with the grain diameter between 3-30mm need to be grind to 100μm or smaller diameter of 5μm. Ball mill process refers to grind materials by means of steel ball or steel bar to make the materials reaching the required diameter.
With the exhaustion of natural sands in recent years, the natural sands cannot meet the demands for the construction market. The emergence of mechanism is the inevitable trend of market development, and also the revolution of construction sands and aggregates material.
In the sand-making production line, each device used in each process is interplayed and indispensable. After the process of feeding and crushing, the mechanical sand can only become the qualified produced sand through the final process - sand washing.
Only high grade ore can be transported into furnace directly, but the amount of high grade ore is little, which can not satisfy the need of metallurgy industry. While it is not economy for processing the low grade ore. So it is necessary to processing the mineral ore in order to improve the economic index of smelting technology.