JC Series Jaw Crusher
Max. Feed Size: 720-1360 (mm)
Feed Opening Size:
Application Fields: metallurgy, mining, chemical, cement, construction, etc.
Applied Material: ore with compression strength less than 300Mpa, rock, slag, etc.
Tel.: +86-379-62669977/78/58 E-Mail: firstname.lastname@example.org
JC Series Jaw Crushers are new type ones developed based on the introduction and absorption of US and Europe technologies on crushers. They are the preferred primary crushers for any kinds of rocks.
1. “V” type of crushing chamber, effective opening size is equal to the nominal opening size (common jaw crusher adopts the traditional asymmetric crushing chamber structure, and effective opening size is smaller than nominal opening size) and the throughput capacity will be increased by 15-20% compared with the normal crushing chamber.
2.The discharge opening applies the hydraulic adjusting unit, the optimized chamber and motion parameter make the product have greater through capacity for same clearance.
3.Smaller discharge clearance for same through capacity. The main components of frame adopt high-quality manganese steel, thickening steel plate, and finite element analysis method is used to evaluate mechanical strength in the process of design to improve the load resistance and impact during using. Cold installation process for bearing and thin oil lubrication make service life prolonged and efficiency of the rotation improved.
4.Four humanized maintenance operation units adopted for easily damaged parts of ASJ – E: bolt fastening and spring removal unit, moving jaw maintenance unit, side guard plate removal unit, adjusting seat replacement unit, so maintenance personnel can easily have inspection, maintenance and care with the four units.
Electrical motor drives the belt wheel to make the swing jaw move following the specific track by eccentric shaft. After the materials enter into the crushing chamber, they are crushed between the two jaw plates by impacting, bending, and striking, and then discharged from the discharge opening.
|Model||Feed Opening Size(mm)||Max. Feed Size（mm）||Discharge Opening Size（mm）/Capacity（t/h）||Power（kw）|
①JC Series Jaw Crusher in Shanxi Province
②JC Series Jaw Crusher in Shanxi Province
③JC Series Jaw Crusher in Shanxi Province