The necessary machinery for starting a stone factory generally has three types of coarse crushing, medium crushing and fine crushing. Users can choose according to the size, hardness, and finished product specifications of the rough stone. However, due to the wide variety of mechanical equipment, you can choose it is not easy to construct a suitable production line at one time. Generally, a rough judgment can be made through the following points:
1. The hardness of raw materials: different raw materials are matched with different crushers, such as pebbles, granite, quartz stone and other high-hardness stones, the choice of crushing stone will be more wear-resistant, such as hydraulic cone crusher, jaw type crushers and other equipment; similarly, if your raw materials have low hardness, such as limestone, gypsum, coal gangue, dolomite, etc., you can choose impact crushers, hammer crushers and other equipment, which can effectively save costs; if you choose not appropriate equipment, such as counterattack to deal with high-hardness materials, although the size of the finished product is improved, but the parts of the equipment will be severely worn and will increase maintenance costs.
2. Production capacity: The configuration of the entire stone crusher production line must be determined based on the actual output of the customer. For example, the plan of 50t/h and 500t/h is very different, and the output range of each type of equipment is not small. For example, the jaw crusher is between 1t/h and 1500t/h, the specific choice depends on your actual output.
3. Budget: In addition to different working principles and manufacturing processes, different types of stone crushers have different prices. After all, you get what you pay for, but you don’t have to choose expensive ones when you actually choose. Some economical ones can also meet processing needs.
4. Finished products: For those with high requirements on the quality of finished products, the configuration production line will be more refined; for the general requirements for finished products, the configuration of the production line can be simpler, which has a greater impact on the overall cost.
5. Site: If the site is bad, users can choose the current more advanced mobile rock breaker production line, which can freely transfer, drive directly into the production site, intelligent control, etc., and control the operation of the equipment only in the operating room. If the crushing project is selected in a place where the raw materials are relatively abundant or the source of goods is relatively stable, you can consider investing in the construction of a fixed crushing production line.
For more information, you can click: www.lydhchina.com