When some users use the sand making machine, they find that the efficiency of the sand making machine is low. What is the reason? How to improve it? In order to avoid this situation and reduce the occurrence of failures, it is necessary to do a good job in the daily use of the sand making machine. For the operator, first of all, he must have rich operating experience and a more comprehensive understanding of the sand making equipment. In order to better operate and use the sand making machine equipment, this will also improve the production efficiency of the sand production line and reduce maintenance costs.
1. Screening and grading sand and gravel aggregates
As far as the impact sand making machine is concerned, the aggregate of the silo is medium-coarse, and the aggregate components processed by the sand making machine are different. The overall ratio in the silo will be inconsistent and rough grinding and fine grinding cannot be achieved in production. Coordination, this will lead to a decline in its balance ability, resulting in uneven quality of aggregate produced by the sand making machine, which cannot meet the construction requirements. Therefore, it is recommended that users screen these aggregates before processing, so as not only to ensure the quality of sand making, but also to improve production efficiency. Even if the same stone and the same sand making machine are used, the crushing effect will be different.
2. The hardness of the raw materials should be appropriate
Since the hardness of the machine-made sand raw materials varies in different regions, if the material is too hard, the crushing process will be longer, and the corresponding sand making machine equipment will consume more vulnerable parts. Therefore, in order to avoid unnecessary waste, when choosing the wear-resistant material and model of the sand making machine, the choice should be based on the hardness of the stone with different hardness.
3. A suitable motor must be configured
If the motor power of the sand making machine is too low or too high, the sand making machine will suffer from uneven particle size, which will result in a reduction in output. Therefore, it is necessary to configure a suitable motor according to the sand making machine model, and the factory power should be adjusted in strict accordance with the requirements of the sand manufacturer.
4. Humidity and viscosity of raw materials
The humidity and viscosity of the machine-made sand raw materials will also affect the output. When the humidity and viscosity of the machine-made sand raw materials are too high, it may cause the sand making machine to block during operation and affect the production output of the sand making machine. Therefore, you should pay attention to the humidity and viscosity of the material.
The above is a summary of the reasons for the low production capacity of the sand making machine. If the output of the sand making machine is low during the production process, you can see if there are problems in the above four aspects. In order to prevent these situations from happening, it is necessary to check the equipment of the sand making machine on a daily basis and eliminate the faults in time to ensure the efficiency and output of sand making.