The gyratory crusher is primarily utilized in the sectors of metallurgy, mining, chemical industry, cement, construction, refractory materials, and ceramics for the crushing of hard ores and rocks. It is used in the first stage of crushing with a maximum compressive strength limit of 200MPa for the material. The feed particle size ranges from 450-1000 mm while achieving an average discharge particle size ≤5-8mm.
How to solve oil temperature rise for gyratory crusher?
1) Check the tube switch if cooling water has problem. Check if any switch no open or jam. Clean jam tube and make sure if any defect of water pump and motor.
2) Usually the crusher working situation is full of powder. The powder is easy to enter and make oil rise. Solution: check the sample and if any rub oil defect. Change the lub oil in time.
3) Oil pump wearing bad can also make oil pressure be low. If any wearing of gear, it cause the low oil pressure and high oil temperature. If in this case, change oil pump.
4) Oil is not enough and if the pipe flange leak, the solution is: flange bolt loosening caused by vibration and the oil, tighten bolts or replacement.
5) Crusher wear parts abrasion. The internal parts belong to wearing parts, mainly includes: copper pad at the bottom of the cone, eccentric sleeve copper pad and the horizontal axis sheath.
Luoyang Dahua Heavy Industry is a high-tech enterprise with research & development production, sales, and service. The mobile crushing station has been successfully applied in domestic and foreign mine crushing projects. The company has a professional R & D team, a strong after-sales team, from the equipment selection, site inspection, equipment manufacturing, installation, commissioning, delivery and other aspects for your service.
