Speaking of crusher lubrication, I believe everyone is aware of the importance of lubrication and maintenance to crushers. The correct lubrication method can improve equipment performance and extend working life. Lubrication is inseparable for any equipment, but sometimes it is clear that regular maintenance is carried out. Why do minor problems continue? The reason is very simple, the problem still appears in the lubrication of the crusher, it is very likely that the lubrication failure caused by some reasons during the operation of the crusher. Let me explain to you the reasons for the effective lubrication of the crusher.
1. Lubricant deterioration
If impurities such as dust and water enter the lubrication system, or the lubricating oil is exposed to sunlight for a long time, it will cause the lubricating oil to deteriorate and cause the lubrication of the equipment to fail. Therefore, the lubrication system must be sealed in production.
2. The pipeline is blocked
Dust generated during long-term operation of the sand making machine may enter the system pipeline through various oil supply points and oil return points, causing blockage of the oil supply line or the oil return line, causing the lubrication system to fail and affecting the normal lubrication of the equipment. Replace the original pipeline with a polymer composite pipe, which can reduce the blockage of the pipeline.
3. Improper selection of lubricants
Different lubricating oils should be used in different seasons. In winter, lubricating oil with lower kinematic viscosity can be used, and lubricating oil with higher kinematic viscosity can be used in summer. On the other hand, because the sand making machine is in a state of high-speed rotation for a long time, and it will produce severe vibrations during operation, it is necessary to choose a lubricant with high viscosity, good adhesion, or good vibration reduction performance.
4. Lubrication system lacks oil
When the lubrication system is cut off or the oil pressure is too low, the lubricating oil cannot enter the lubrication point, and the lubricating part will be heated due to lack of oil, which is also one of the reasons for the failure of lubrication. To solve this problem, self-made oil cut alarm can be installed in the lubrication system. When the system is short of oil, the alarm will alert the staff to refuel in time to ensure good lubrication of the equipment.
5. There are impurities in the lubrication system
Impurities in the lubrication system will definitely cause the lubrication to fail, so the cleaning of the lubrication system is also a very important task. When changing the oil, clean gasoline or kerosene should be used to carefully clean all parts to ensure that the lubrication system is clean and free of debris. Ensure the normal operation of the sand making machine and reduce the occurrence of failures caused by lubrication failure.
There are various reasons for equipment failure, not just because of lubrication failure. In actual production, users also need to check and repair in time according to their own conditions, so as not to cause greater losses.