The Preparation works before starting the jaw crusher are as follows:
1. Check the lubrication condition, check whether there are enough grease in the joint of toggle plate.
2. Check whether each fastener is tightening enough or not.
3. Check the transmission belt. Replace the new one if found damaged or clean the oil contamination.
4. Check the protection device, if found unsafe, should remove the problem immediately.
5. Check whether there are crushed ore or sundries inside the crushing cavity. Clean the crushing cavity, if found the ore or sundries to ensure the crushing cavity start without load.
If you want to know more detail information, please contact us.
Tel: +86-379-62669978
Email: lydhchina@huazn.com