Many people confuse processing capacity with output, wrongly thinking that it is the output of this type of machine. Actually it's not, there is an essential difference between processing capacity and output.
Processing capacity: it refers to the capacity to process materials of crusher, means the feed amount of feeding opening. For example, the processing capacity of C1020×800 jaw crusher is 185-500t/h, means the jaw crusher can process materials in 185-500t. Among this scope, the materials can be processed smoothly; the processing amount is in the best limit. Under such situation, the crusher runs stably with high efficiency.
Output: it is the finished products that processed per hour. For example, the output of JC110 jaw crusher is 144-368t/h, means the finished products per hour between 144-368t. Many people mistake the processing capacity to output when read the instruction.
So does processing capacity equal to output? Luoyang Dahua will give you the analysis based on the rich experiences.
Firstly, the output is nearly equal to the input, normally it is lower than the processing capacity.
Secondly, if the output do not equal to the processing capacity, where does the redundant materials go? One is flow in site in dust; moreover, the crushing process is multi crushing, the non-qualified materials are delivered again to the crushing cavity for further crushing, only the qualified materials are discharged. That is to say, the finished products account for most part of the feed materials. So there are some differences between the two factors.
To summarize, the output is based on the amount of processing capacity. The higher the processing capacity, the larger the output, and vice versa. The output never equal or exceed the processing capacity.