There are various types of equipment and complete models. We recommend jaw crushers, impact crushers, hydraulic cone crushers, and hammer crushers, which can crush large stones into stones of different specifications, usually in accordance with the working principle. The size of the material and discharge particle size is divided into coarse crushing, medium crushing and fine crushing. The specific introduction is given below, and the user can choose reasonably according to the actual situation.
1. Jaw Crusher
Feeding particle size: ≤1360mm
Processing capacity: 50-1500t/h
Performance characteristics: The jaw crusher has a large feed size, which can be used for primary coarse crushing of raw materials; the integrated installation structure of the main machine and the motor is firm and reliable, and the footprint is small; the wedge-type discharge opening adjustment method realizes step less adjustment, to reduce the labor intensity of workers and downtime; the large inclination bracket design makes the lower stroke of the cavity larger and higher output.
Feed size: <1000mm
Processing capacity: 50-1200t/h
Performance characteristics: used for crushing soft ore (limestone, etc.), the finished product has good grain size and less powder, and is mostly used in small and medium stone factories, but cannot be used for sand making; the user can adjust the gap between the impact board and the hammer to control the output material granularity: The new high wear-resistant materials are used in large quantities, and are equipped with a variety of safety lock devices to extend the service life, improve safety performance and save costs.
Feed size: ≤560mm
Processing capacity: 45-2176t/h
Performance characteristics: cone crusher is mainly used to crush hard materials, and has large production capacity and high crushing efficiency. It is suitable for large stone factories; it has iron-pass protection and automatic cavity cleaning functions, which are stable and reliable; components can be disassembled from the upper and side, which is convenient check and repair; the price is slightly expensive, but the use cycle is long, and the automatic control system can easily realize remote control.
Feed size: ≤1500mm
Processing capacity: 250-2000t/h
Performance characteristics: suitable for crushing limestone and medium-hard ore with compressive strength lower than 200Mpa; sledge hammer head, dual power, satisfying larger production capacity; one-time forming, no secondary crushing process, suitable for users with small working sites. At the same time, it reduces the purchase of other crushing equipment and saves investment costs.
Feed size: ≤240mm
Processing capacity: 8-500t/h
Performance characteristics: used in the fine crushing and shaping of minerals and rocks in a variety of metal and non-metal mines, refractory materials, abrasive ceramic raw materials, building materials, high-speed railway construction, water conservancy and hydropower construction, and civil sand and gravel aggregate production, especially for centering hard, extra-hard or abrasive materials, such as sandstone, granite, basalt, silicon carbide, emery, alumina, magnesia, etc. are more superior than other equipment. It has two crushing principles of "stone beat stone and stone beat iron", sharing a set of crushing cavity; equipped with hydraulic lifting opening device, manual or electric hoist, convenient for maintenance; equipped with PLC automatic control and monitoring system, high safety performance and convenient monitoring.