In the stone crushing plant, the large rocks are fed to the stone crusher for coarse, medium and fine crushing. The safety operation of these crusher machines will directly affect the working efficiency of the machine and the whole production line. Following are the 6 tips for the operation of large stone crusher machine.
1. Run the crusher machine without looking at the instructions or unfamiliar with the operation specification of the crusher. This situation is easy to cause accidents, the operation should be guided by the installation personnel.
2. Keep the crushing cavity clean before starting. Clean up the debris such as ore or iron remaining in the crushing chamber to avoid load operation when starting up, so as not to cause trip or parts damage.
3. Pay attention to the protection of wire. The quality of the wire should be guaranteed. After placing the wire, try not to move the mobile power supply. If the wire is broken, it should be stopped immediately.
4. The staff should do good personal protection. The crusher will inevitably have some noise pollution when working. It will be fine for a while, but the body can’t stand staying in such an environment for a long time, so the operator should do a good personal protection when working.
5. Pay attention to the maintenance of stone crusher machine. Careful maintenance can make the use of stone crusher for a longer time, such as regular inspection of motor belt, rod spring tension, bolts, flywheel, jaw plate, and bearing parts, etc. If there is any abnormality, stop the machine and check.
6. Turn off the power supply of the stone crusher first when the power is cut off unexpectedly. If the power supply is suddenly restored, it is easy to cause damage to electrical equipment and stone crusher machine.
Above are the 6 tips for the operation of large stone crusher machine. Luoyang Dahua produces various kinds of stone crusher machine, if you have any questions, please contact us at any time.
